Downloadable accesories brochure - English

STANDARD LIGHT DUTY COMBO SPEAKER MIC

PART #: MIC-1. Very compact, very affordable without sacrificing audio output, excellent for EMS operations and volunteers, features an electret condenser style mic element producing excellent audio quality with a built-in powerful speaker. Has built-in LED for visual indication of hand-held transceiver transmit function, w/ built-in 3.5mm jack to accept 3.5mm earphone piece. Microphone-- Impedance: 2.2K ohms. Sensitivity:-56dB+/-2dB. Frequency response: 100Hz-10KHz Speaker--Impedance: 8ohms+/-15%.Sensitivity :82dB+/-3dB. Frequency response: 380Hz-14KHz. Rated Power: 2.0 W

HEAVY DUTY COMBO SPEAKER MIC

PART #: MIC-2. IP-54 rated water resistant unit. Heavy duty construction, rubber sealed housing for heavy duty use in wet environments. Large PTT switch. Metal reinforced clip that rotates 360 degrees. Comes with 3.5mm jack that accommodates various style ears pieces.

SOFT EAR MIC

PART #: MIC-3. Light Duty Ear Bud Earphone with lapel PTT switch with microphone. Microphone--Sensitivity: -36dB+/-2dB. Impedance: 2.2K ohms. Speaker --Sound pressure level: 103dB+/-3dB. Impedance: 32 ohms+/-15% . Audio output: 30mW.

SOFT EARHOOK MIC

PART #: MIC-3A. Ear-hook bud earphone with reversible side PTT button suiting right or left PTT operation as the ear loop is reversible, with electret non-directional mic element. Diameter 15mm, Microphone--Sensitivity: -36dB+/-2dB. Impedance: 2.2K ohms. Speaker--Sound pressure level: 103dB+/-3dB. Impedance: 32 ohms+/-15%. Audio output: 30mW.

LIGHT-MEDIUM DUTY SPEAKER MIC

PART #: MIC-5. Medium Duty, Compact, ideal for EMS and Fire Line Officers, Water resistant. Output level: 83dB. Maximum power: 2 watts. Impedance: 8 ohms. Non directional electret condenser microphone with -58 dB. Sensitivity output: 2k ohms. 25 mm jack for optional earpiece.

MOTOROLA STYLE MIC

PART #: MIC-6. Light to medium duty, not water rated. Direct replacement for Motorola style with K connector. Microphone--Impedance: 2.2K ohms. Sensitivity: -36dB+/-3dB. Frequency response: 20Hz-16KHz. Speaker--Impedance: 8ohms+/-15%.Sensitivity: 90dB+/-3dB. Frequency response: 20Hz-20KHz. Rated Power: 2.0 W.

THROAT MIC & THROAT MIC W/BUD EARPHONE

PART #: MIC-7. Complete with both PTT and Finger Operated PTT acoustic ear semi-transparent in color, semi-covert with silicon ear tip to provide noise cancellation with waterproof PTT switch. PART #: MIC-7A. Same as MIC-7, but with standard bud style earphone provides better audio quality from speaker. Earphone specs: Diameter 15mm. Output level: 100dB/0/05 watts.

BONE MIC

PART #: MIC-8. Bone Microphone, earpiece serves as both speaker and microphone. Max input power: 200 mW. Sensitivity: 92 dB. Impedance: 32 ohms

LIGHT DUTY 1/2 HEADSET W/BOOM MIC

PART #: MIC 11. Light Duty ½ Headset with Boom Mic. Microphone--Sensitivity: -56dB+/- 2dB. Impedance: 2.2K ohms. Speaker-- Sound pressure level: 83dB +/-3dB. Impedance: 32 ohms +/- 15%. Audio output: 50m.

HEAVY DUTY EAR MUFF HEADSET W/BOOM MIC

PART #: MIC-12. Noise Cancelling Ear Muff Style Heavy Duty Headset with Boom Mic

PROGRAMMING CABLE SERIAL PORT

PART #: PG-1. Programming cable for PC. DB-9 serial port connector to K style that connects to the radio.

PROGRAMMING CABLE USB

PART #: PG-2. Programming cable with s/w (USB to K Style)

PROGRAMMING CABLE RADIO TO RADIO

PART #: PG-3. Radio to Radio programming cable (K to K Style).

136-174 MHz REPLACEMENT FLEX ANTENNA

PART #: ANT-R-V. Standard 136-174 MHz Replacement Flex Antenna 2.6 dB gain.

400-470 MHz REPLACEMENT FLEX ANTENNA

PART #: ANT-R-U. Standard 400-470 MHz Replacement Flex Antenna 2.6 dB gain.

136-174 MHz STUBBY FLEX ANTENNA

PART #: ANT-S-V. Optional 136-174 MHz Stubby Flex Antenna 2.35 dB gain.

400-470 MHz STUBBY FLEX ANTENNA

PART #: ANT-S-U. Optional 400-470 MHz Stubby Flex Antenna 2.356 dB gain.

VHF TELESCOPIC ANTENNA

PART #: ANT-T-V. Optional VHF telescoping antenna, 0 to 3.3 dB gain.

UHF TELESCOPIC ANTENNA

PART #: ANT-T-U. Optional UHF telescoping antenna, 0 to 3.3 dB gain.

CS-1. AA 12 BATTERY CLAMSHELL

PART #: CS-1. AA 12 BATTERY CLAMSHELL. Replaces rechargeable battery with snap on back, allowing use of non-rechargeable alkaline battery--ideal for wildland/SAR use!

SPARE 1700 maH BATTERY

PART #: BATT-2. Spare Li-ion 1700 mAH battery for radio with belt clip

SPARE BATTERY CLIP

PART #: CL-1. Spare battery clip for battery assembly.

LEATHER CASE

PART #: LC-1. Leather Case for Radio

SPARE RAPID CHARGER

PART #: CHG-1. Spare Rapid Charger with AC power adapter

AA 12 BATTERY CLAMSHELL

PART #: CS-1. Replaces rechargeable battery with snap on back, allowing use of non-rechargeable alkaline battery. Ideal for Wildland & SAR use.

NEW! 6-BANK UNIVERSAL BATTERY CHARGER

PART #: BC-2. Standard 12-24 VDC or optional 100-240 VAC power inputs, may charge any type of battery for any make of radio using the appropriate battery insert. Allows a mobile incident command center or other DC environment to charge any 2-way radio battery without the need for a source of AC power! The charger also features an on board embedded micro processing unit that automatically detects the battery pack voltage and chemistry. Mix and match makes and models of batteries!

DETAILS

Multiple inserts are available to accommodate any style battery.

• Battery Type: 6-12 V Ni-MH/Ni-Cd, 7.2 V Li-ion Battery pack Automatic voltage selection by the charger!
• Power Input: Power Input: 12-24 VDC (for AC Operation requires Optional External AC to DC adapter)
• Output: 6-12 VDC, 650mA
• Listings: UL, CE
• Housing: Black, High-impact plastic
• Weight/Size: Approx.. 5 Kg., 510 mm x 198 mm x 120 mm

ACCOMMODATES THE FOLLOWING BATTERY PACKS

• INFINITY: P-777/P1000 Batt-1, Batt-2
• Motorola: EP-450/CP150/CP200/PR400/, PRO5150/ 7150/9150, HT750/1250/1550, GP328/320/340/380, GP300/88/GTX/PTX600/GTXSER/LTS200/MTX638/GP600, HT1000/MT2000/MTS2000/GP900/GP1200/MTX8000/MTX900/838/MTXLS/B7/B5/B3
• Kenwood: TK260/360/270/370/278/278G/378/78G/388/2107/3107, TK280/380/480/481/290/385, TK2140/3140 3131/260/3160, TK3202/2202/3207
• Icom: IC-F3GT/F3GS/F4GT/F4GS/F21BR/21GM/F14/24/16/26
• Uniden: SPS801/802